-
PowerEdge M1000e Error Messages
The following tables show
the possible error messages and their causes that
may be observed from either the front
panel LCD or the Chassis Management
Controller (CMC) System Event Logs
(SEL).
CMC Status
Screens
Severity
Message
Critical
Critical
CMC
sensor for
CMC, failed was asserted
CMC
Temperature sensor
for CMC, failure
event
Critical
CMC
Temperature
sensor for CMC, failure
event
CMC Ambient
temperature exceeded the
critical
threshold.
CMC CPU
temperature exceeded the
critical
threshold.
Cause
CMC CMOS battery is missing or no
voltage
Enclosure/Cha
ssis Status
Screen
Severity
Message
Critical
Chassis
Fan
sensor for
Chassis Fan, device
removed was
asserted
Warning
Power Supply Redundancy: PS
Redundancy sensor for Power Supply,
redundancy degraded was
asserted
Critical
Power Supply Redundancy: PS
Redundancy sensor for Power Supply,
redundancy lost was asserted
Critical
Power
Supply Redundancy: PS
Redundancy sensor
for Power Supply,
non-redundant:
insufficient resources
Critical
Critical
Control
Panel Temp: Temperature
sensor for
Control Panel, failure event
CMC
Controller sensor for CMC,
non-redundant was asserted
Critical
Chassis
Eventlog CEL: Event Log
sensor for
Chassis Eventlog, all event
logging
disabled was asserted
Critical
Chassis
Eventlog CEL: Event Log
Chassis device
detects that only one entry
One or more
PSU have failed or removed
and the
system lacks sufficient power to
maintain normal operations. This could
cause servers to power down.
Chassis/Enclosure temperature exceeded
the critical threshold.
CMC no longer redundant. Note: will
only
show if the standby CMC was
removed or
failed.
The CMC can not log events.
One or more PSU have failed or removed
and the system can no longer support
full
PSU redundancy.
One or more PSU have failed or removed
and the system is no longer
redundant.
Cause
This fan is required for proper cooling
of the
enclosure/chassis.
sensor for Chassis Eventlog, log full
was asserted
Warning
Chassis
Eventlog CEL: Event Log
sensor for
Chassis Eventlog, log
almost full was
asserted
can be added to the
CEL before it is full.
Chassis event log is 75%
full.
Fan Status
Screens
Severity
Message
Critical
Chassis
Fan
sensor for
Chassis Fan, failure event
Cause
The speed
of the specified fan is not
sufficient
to provide enough cooling to the
system.
IOM
Status Screens
Severity
Message
Warning
I/O
Module
sensor
for I/O Module, transition to
non-
critical from OK was asserted
Critical
I/O
Module
sensor
for I/O Module, transition to
critical
from less severe was asserted
Severity
Warning
Message
Local KVM
Health: Module sensor
for Local KVM,
transition to
non-critical from OK was
asserted
Critical
Local KVM Health: Module sensor
for Local KVM, transition to critical
from less severe was
asserted
Non-
Recoverable
Local KVM
Health: Module sensor
for Local KVM,
transition to
non-recoverable was
asserted
PSU Status
Screens
Severity
Message
Critical
Power
Supply PSU
Supply
sensor for Power Supply,
failure was
asserted
Critical
Power Supply PSU
Supply sensor for Power Supply, input
lost was asserted
Server Status Screens for
M600/M605
Severity
Message
Cause
Lost of AC
power or AC cord unplugged
Cause
The PSU has
failed
Serial RIP failure or
USB host chip
failure
USB host enumeration failure or
OSCAR failure
The
I/O module has a fault. The same error
can also happen if the I/O module is
thermal-tripped.
Cause
Minor
failure, such as corrupted
firmware.
Cause
The IO
module was good, but now having
fabric
mismatch or link tuning mismatch.
iKVM Status Screens
Warning
System
Board Ambient Temp:
Temperature sensor
for System
Board, warning
event
Server Ambient
temperature crossed a
warning threshold
Critical
System Board Ambient Temp:
Temperature sensor for System
Board, failure event
Server Ambient temperature crossed a
failing threshold
CMOS battery is not present or has no
voltage
Current
crossed a warning threshold
Critical
System
Board CMOS Battery:
Battery sensor for
System Board,
failed was
asserted
Warning
System Board Current Monitor:
Current sensor for System Board,
warning event
Critical
System
Board Current Monitor:
Current sensor
for System Board,
failure
event
Current crossed a
failing threshold
Critical
sensor for System
Board, state
asserted was
asserted
Voltage out of
range
Critical
CPU
sensor for CPU
was asserted
CPU
failure
Critical
CPU
sensor for CPU
tripped was asserted
CPU overheated
Critical
CPU
sensor for CPU
configuration error was
asserted
Incorrect processor
type or in wrong
location
Required CPU is missing or not
present
Critical
CPU
sensor for CPU
presence was deasserted
Critical
System
Board Video Riser: Module
Required
module was removed
sensor
for System Board, device
removed was
asserted
Critical
Mezz B Status: Add-in Card sensor
Incorrect Mezzanine card installed for
for Mezz B, install error was
asserted
IO
fabric
Incorrect Mezzanine
card installed for
Critical
Mezz C Status: Add-in Card
asserted
sensor
for Mezz C, install error was
IO
fabric
Critical
Backplane Drive
Slot sensor for Backplane, drive
removed
Storage
Drive was removed