-
Safety Data Sheet according to (EC) No
1907/2006
Page 1 of 7
sds
no. : 210766
V002.1
Revision: 04.08.2011
printing date: 13.12.2011
97SC C811 5C 0.56MM 0.5KG
SECTION 1: Identification of the
substance/mixture and of the company/undertaking
Product identifier:
97SC
C811 5C 0.56MM 0.5KG
Relevant
identified uses of the substance or mixture and
uses advised against:
Intended use:
Solder Wire
Details of the
supplier of the safety data sheet:
Henkel Limited
2 Bishop
Square Business Park
AL109EY
Herfordshire Hatfield
Great Britain
Phone: +44 1606 593933
Fax-
no.: +44 1606 863762
@
Emergency Telephone Number:
24 Hours Emergency Tel: +44 (0)1442
278497
SECTION 2: Hazards
identification
Classification of the
substance or mixture:
Classification
(DPD):
Substances and preparations
marketed in a specific form or within specific
containers need not to
be classified in
accordance
with 67/548/EEC and
1999/45/EC for chemical substances and
preparations.
Label elements (DPD):
Avoid breathing fumes given out during
soldering.
Flux fumes may irritate the
nose, throat and lungs and may after
prolonged/repeated exposure give an allergic
reaction
(asthma).
After
handling solder wash hands with soap and water
before eating, drinking or smoking.
Substances and preparations marketed in
a specific form or within specific containers need
not to be classified in
accordance
with 67/548/EEC and 1999/45/EC for
chemical substances and preparations.
Keep out of reach of children.
Other hazards:
Flux fumes
emitted during reflow will irritate the nose and
throat and may cause an asthmatic type reaction.
This product contains modified rosin.
SECTION 3: Composition/information on
ingredients
Declaration of the
ingredients according to CLP (EC) No 1272/2008:
No data available.
MSDS-No.:
210766
V002.1
97SC C811 5C
0.56MM 0.5KG
Page 2 of 7
Declaration of ingredients according to
DPD (EC) No 1999/45:
Hazardous
components
CAS-No.
EC Number
REACH-Reg No.
content
Classification
Tin
7440-31-5
231-141-8
80 - 100 %
Silver
7440-22-4
231-131-3
1 - 5 %
Copper Metal
7440-50-8
231-159-6
0,1 - 1 %
For full text of the R-Phrases
indicated by codes see section 16 'Other
Information'.
Substances without
classification may have community workplace
exposure limits available.
SECTION 4:
First aid measures
Description of first
aid measures:
Inhalation:
Move to fresh air. If symptoms persist,
seek medical advice.
Skin contact:
Rinse with running water and soap.
Obtain medical attention if irritation
persists.
Eye contact:
Flush
eyes with plenty of water for at least 5 minutes.
If irritation persists seek medical attention.
Ingestion:
Do not induce
vomiting.
Seek medical advice.
Most important symptoms and effects,
both acute and delayed:
No particular
measures required.
Indication of any
immediate medical attention and special treatment
needed:
See section: Description of
first aid measures
SECTION 5:
Firefighting measures
Combustion
behaviour:
The product itself does not
burn. Any fire extinguishing action should be
appropriate to the surroundings.
Extinguishing media:
Extinguishing media which must not be
used for safety reasons:
Do not use
water on fires where molten metal is present.
Special hazards arising from the
substance or mixture:
High temperatures
may produce heavy metal dust, fumes or vapours.
The flux medium will give rise to
irritating fumes.
Advice for
firefighters:
Wear self-contained
breathing apparatus.
SECTION 6:
Accidental release measures
Personal
precautions, protective equipment and emergency
procedures:
Wear protective equipment.
MSDS-No.: 210766
V002.1
97SC C811 5C 0.56MM 0.5KG
Page 3 of 7
Environmental
precautions:
Do not empty into drains /
surface water / ground water.
Methods
and material for containment and cleaning up:
Scrape up spilled material and place in
a closed container for disposal.
Reference to other sections:
See advice in chapter 8
SECTION 7: Handling and storage
Precautions for safe handling:
Extraction is necessary to remove fumes
evolved during reflow.
When using do
not eat, drink or smoke.
Wash hands
before breaks and immediately after handling the
product.
See advice in chapter 8
Hygiene measures:
Good
industrial hygiene practices should be observed.
Wash hands before work breaks and after
finishing work.
Do not eat, drink or
smoke while working.
Conditions for
safe storage, including any incompatibilities:
Ensure good ventilation/extraction.
Store in a cool, dry place.
Specific end use(s):
Solder
Wire
SECTION 8: Exposure
controls/personal protection
Control
parameters:
Valid for
Great
Britain
Ingredient ppm mg/m
3
Type Category Remarks
TIN
(INORGANIC COMPOUNDS AS SN)
7440-31-5
2 Time Weighted Average
(TWA):
Indicative ECTLV
SILVER (METALLIC)
7440-22-4
0,1 Time Weighted Average
(TWA):
EH40 WEL
SILVER, METALLIC
7440-22-4
0,1 Time Weighted Average
(TWA):
Indicative ECTLV
Colophony (Rosin) and derivatives:
Rosin-based flux fume as total resin acids.
Exposure controls:
Engineering controls:
Extraction is necessary to remove fumes
evolved during reflow.
Where reasonably
practicable this should be achieved by the use of
local exhaust ventilation and good general
extraction.
Ensure good
ventilation/extraction.
Respiratory
protection:
Ensure adequate
ventilation.
An approved mask or
respirator fitted with an organic vapour cartridge
should be worn if the product is used in a poorly
ventilated area
Filter type:
A
Hand protection:
Please
note that in practice the working life of chemical
resistant gloves may be considerably reduced as a
result of many
influencing factors
(e.g. temperature). Suitable risk assessment
should be carried out by the end user. If signs of
wear and
tear are noticed then the
gloves should be replaced.
The use of
chemical resistant gloves such as Nitrile are
recommended.
MSDS-No.: 210766
V002.1
97SC C811 5C 0.56MM
0.5KG
Page 4 of 7
Eye
protection:
Safety glasses with
sideshields or chemical safety goggles should be
worn if there is a risk of splashing.
Skin protection:
Wear
suitable protective clothing.
SECTION
9: Physical and chemical properties
Information on basic physical and
chemical properties:
Appearance solid
grey
Odor None
pH
not applicable
Initial boiling point
Not determined
Flash point None
Decomposition temperature No data
available / Not applicable
Vapour
pressure not applicable
Density
-
-
-
-
-
-
-
-
-
上一篇:加拿大与澳大利亚对比
下一篇:各国名字的英文翻译