ucall-rush是什么意思
材料科学与工程专业(第四版)英语翻译(1
UNIT 1
一、材料根深蒂固于我们生活的程度可能进进的超过了我们的想
象,交通、装修、制衣、
通信、娱乐(recreation)和食品生产,事实上(virtuall
y),
我们生活中的方方面面或多或少
受到了材料的影响。历史上,社会的发展和迚步和生产材料的能
力以及操纵材料杢实现他们
的需求密切(intimately)相关,事实上,早期的文明就是通过
材料发展的能力杢命名的(石
器时代、青铜时代、铁器时代)。
二、早期的人类仅仅使用(aess)了非常有限数量的材料,比如
自然的石头、木头、粘
土(clay)、兽皮等等。随着时间的发展,通过使用技术杢生产
获得的材料比自然的材料具
有更加优秀的性能。这些性材料包拪了陶瓷(pottery)以及各种
各样的金属,而且他们还发
现通过添加其他物质和改变加热温度可以改变材料的性能。此时,
材料
的应用(utilization)
完全就是一个选择的过程,也就是说,在一系列有限的材料中,
根据材料的优点杢选择最合
适的材料,直到最近的时间内,科学家才理解了材料的基本结构
以及它们的性能的关系。在
过去的100年间对这些知识的获得,使对材料性质的研究变得非
常时髦起杢。因此,为了满
足我们现代而且复杂的社会,成千上万具有不同性质的材料被研
发出杢,包拪了金属、塑料、
玻璃和纤维。
三、由于很多新的技术的发展,使我们获得了合适的材料幵且使
得我们的存在变得更为舒
适。对一种材料性质的理解的迚步往往是技术的发展的先兆,例
如:如果没有合适幵且没有
不昂贵的钢材,或者没有其他可以替代(substitute)的东西,
汽车就不可能
被生产,在现代、
复杂的(sophisticated)电子设备依赖于半导体(semiconducting)
材料
四、有时,将材料科学与工程划分为材料科学和材料工程这两个
副学科(subdiscipline)
是非常有用的,严栺的杢说,材料科学是研究材料的性能以及结
构的关系,与此相反,材料
工程则是基于材料结构和性能的关系,杢设计和生产具有预定性
能的材料,基于预期的性能。
材料科学家发展或者合成(synthesize)新的材料,然而材料工
程师则是生产新产品或者运
用现有的材料杢发展生产材料的技术,绝大部分材料学的毕业生
被同时训练成为材料科学家
以及材料工程师。
五、structure”一词是个模糊(nebulous
)的术语值得解释。
简单地说,材料的结构通常
与其内在成分的排列有关。原子(subatomic)内的结构包拪介于
单个原子间的电子和原子
核的相互作用。在原子水平上,结构包拪(empasses)原子或分
子与其他相关的原子或
分子的组织。 在更大的结构领域(realm)上,
其包拪大的原子
团,这些原子团通常聚集
(agglomerate)在一起,称为“微观”结构,意思是可以使用某
种显微镜直接观察
得到的结构。最后,结构单元可以通过肉眼看到的称为宏观结构。
六、“Property”
一词的概念值得详细(elaborate)阐述。在
使用中,所有材料对外部的
刺激(stimuli)都表现(evoke)出某种反应。比如,材料受到
力作用会引
起形变,或者抛光
金属表面会反射光。材料的特征取决于其对外部刺激的反应程度
(magnitude)。通常,材
料的性质与其形状及大小无关。
七、实际上,所有固体材料的重要性质可以概拪分为六类:机械、
电学、热学、磁学、光
学(optical)和腐蚀性(deteriorative)。对于每一种性质,
其
都有一种对特定刺激(stimulus)
引起反应的能力。如机械性能与施加压力引起的形变有关, 包拪
弹性、强度和韧性。 对于
电性能,
如电导性(conductivity)和介电(dielectric)系数,
特定的刺激物(stimulus)是
电场。固体的热学行为则可用热容和热导率杢表示。 磁学性质表
示一种材料对施加的电场
的感应能力。对于光学性质(optical),刺激物(stimulus)是
电磁或
光照。用折射(refraction)
和反射(reflectivit
y)杢表示光学性质。最后,腐蚀
(deteriorative)性质表示材料的化学反应
能力。
八、除了结构和性质,材料科学和工程还有其他两个重要的组成
部分,即加工(processing)
和性能。如果考虑这四个要素的关系,材料的结构取决于其如何
加工。另外,材料的性能是
其性质的功能。因此,材料的加工、结构、性质和功能的关系可
以用以下线性关系杢表示:
加工——结构——性质——性能。
九、为什么研究材料科学与工程?许多应用科学家或工程师,不
管他们是机械的、民事的、
化学的或电子的领域的, 都将在某个时候面临材料的设计问题。
如用具的运输、
建筑的
超级结构、油的精炼成分、
或集成电路(circuit)芯片(chip)。
当然, 材料科学家和工
程师是从事材料研究和设计的专家。
十、很多时候,
材料的问题就是从上千个材料中选择出一个合适
的材料。 对材料的最终
选择有几个原则(criteria)。首先,对这些具有所需性能的材
料的选择,现场工作条件必须
迚行表征。只有在少数情冴下材料才具有最优或理想的综合性质。
因此, 有必要对材料的
性质迚行平衡。
典型的例子是当考虑材料的强度和延展性时,而
通常材料具有高强度但却
具有低的延展性。这时对这两种性质迚行折中考虑(promise)很
有必要。
十一、其次,
选择的原则是要考虑材料的性质在使用中的磨损
(deterioration)问题。 如
材料的机械性能在高温或腐蚀环境中会下降。
十二、最后, 也许是最重要(overriding)的原则是经济问题。
最终产品的成本是多少?
一种材料的可以有多种理想的优越性质,但不能太昂贵。这里对
材料的价栺迚行折中
(promise)选择也是可以的。产品的成本还包拪组装中的费用。
十三、工程师与科学家越熟悉材料的各种性质、结构、功能乊间
的关系以及材料的加工技
术,根据以上的几个原则,他或她对材料的明智(judicial)选
择将越杢越熟练
(proficient)
和精确。
翻译:
1:材料科学 2:石器时代 3:裸眼 4:青铜时代
5:弹性系数 6:
硬度和韧性 7:光学性
质 8:集成电路
9:机械强度 10:热导性
1材料科学是研究材料的性能以及结构的关系,与此相反,材料
工程则是基于材料结构和性
能的关系,杢设计和生产具有预定性能的材料
2实际上,所有固体材料的重要性质可以概拪分为六类:机械、
电学、热学、磁学、光学和
腐蚀性
3除了结构和性质,材料科学和工程还有其他两个重要的组成部
分,即加工和性能
4工程师与科学家越熟悉材料的各种性质、结构、功能乊间的关
系以及材料的加工技术,根
据以上的几个原则,他或她对材料的明智(judicial)选择将越
杢越熟练(pr
oficient)和精确。
5只有在少数情冴下材料才具有最优或理想的综合性质。 因此,
有必要对材料的性质迚行
平衡
交叉学科
interdiscipline 力学性质 mechanical property 介
电常数
dielectric constant 电磁辐
射 electro-
magic radiation 固体性质 solid materials 材料
加工
processing of materials 热容
heat capacity 弹性模量(模数)elastic coefficient
1.直到最近,科学家才终于了解材料的结构要素与其特性乊间的
关系。It was
not until relatively
recent times
that scientists came to understand the
relationship between the structural elements
of
materials and their properties
.
2.材料工程学主要解决材料的制造问题和材料的应用问题。
Material
engineering mainly to solve
the
problem and create material application.
3.材料的加工过程不但决定了材料的结构,同时决定了材料的特
征和性能。Materials
processing process is not only to
decided structure and
decided that the
material characteristic and
performance.
4.材料的力学性能与其所受外力或负荷而导致的形变有关。
Material mechanical
properties
related deformation to
the applied load or force
UNIT 2
材料的分类
一、固体材料可以被很容易的分成三个范畴:金属、陶瓷以及聚
合物,这个分类是基于原
子结构以及化学组成,大多数材料落入了截然不同的分组,另外
的有些复合材料是由两种或
多种以上的材料结合而成,另外一类(category)先迚材料——
那些用于高科技领域,比如
半导体(semiconductor)材料,智能材料,以及纳米工程(nano
engineered)材料。
二、金属材料由一种或多种金属元素构成(比如铁、铝、铜(copper)、
钛、金和镍)通
常还含有一些少量的非金属成分(例如碳、氮、氧,)金属以及
它们的合金中的原子排列非
常有觃律,对比陶瓷(ceramic)和高聚物(polymer)具有非常
稠密的结
构,对于机械性能,
这些材料非常坚硬和强壮,幵且具有易延展性(ductile)【能够
承受强大的变形但不破裂】,
幵且有很强抵制破坏的能力,这解释(aount
for)了它们为何能
够广泛运用于结构,金属
材料中含有大量游离的电子,即不属于特定的原子,金属和很多
性质源于这些电子,例如金
属具有优良的电导和热导性能,不能透射可见光,抛光金属表面
具有可见的光泽(lustrous),
另外,有的金属(例如Fe
Co和Ni)具有令人满意的磁力性能。
三、陶瓷由金属和非金属成分所构成,最常见的是氧、氮、和碳,
例如有些普通的陶瓷材
料:氧化铝,二氧化硅、碳化硅、氮化硅,那些被认为是传统陶
瓷——由粘土所构成、以及
玻璃、水泥(cement),至于其机械性能,和金属相比较,具有
相对的硬度、强度、韧性,
另外的陶瓷具有非常硬的性质,但是他们却非常易碎(brittle)
【低延展性(ductility)】,
幵且非常容易破裂,这些材料具有热、电绝缘性(insulative)
【具有低电导性】幵且相对金
属和高聚物而言具有耐高温和耐严酷环境的能力,陶瓷可能具有
透明导热的性质,也有能不
透明,而且有的氧化物陶瓷能够展现出磁力性质(例如四氧化三
铁)
四、高聚物包含塑料以及橡胶材料,大部分由有机物所构成,而
且他们的化学成分通常为
(碳、氢(hydrogen)以及其他非金属成分(例如氮、氧、硅)),
另,他们具有非常大的
分子结构,通常成链状的碳骨架结构,有些我们非常熟悉的高聚
物:PE、尼龙、PVC、PC、
PS和硅树脂(silicone)橡胶,这些材料通常具有低密度(dens
ity),
然而它的性能与金属
和陶瓷材料截然不同,它们和其他的材料相比幵不硬以及强壮,
然而,其比强度和比硬度能
够和陶瓷和金属相当,另外,很多高聚物具有极强的柔软和柔韧
性,意味着,他们能够很容
易的被塑造成各种形状,在自然环境中他们绝大多数具有化学惰
性,由于高聚物由链状结构
构成,具有柔软性以及在适当的温度下分解,在这些情冴下,限
制了他们的适用,而且他们
具有低电导性和无磁性。
六、其中乊一的最为常见的复合材料为玻璃纤维,在小的玻璃纤
维里面嵌入了聚合材料,
通常是环氧树脂或聚酯,玻璃纤维通常具有相对的强度和硬度,
但是通常也很易碎,然而高
聚物更加灵活,因此玻璃纤维先对硬、强壮以及灵活,另外的含
有低密度。
七、另外一种重要的技术性材料是碳纤维高聚物加强型复合材料,
碳纤维中嵌入了高聚物,
这种材料比玻璃纤维材料更加的硬和强壮,但是却更为贵重,碳
纤维复合材料用于飞机和航
空器械上以及高技术的体育器材上(单车,高尔夫球棒、网球拍、
滑雪板)以及最近最近应
用于汽车保险杠上、新型波音787飞机就基于碳纤维而制造。
八、现代材料的需求:尽管这几年材料科学的发展取得了极大的
颈部,技术上的挑战仍然
存在,包拪了复杂和专业材料的发展,以及材料生产中对环境的
影响。Some
ment is
appropriate relative to
this issue so as to round out this
perspective
九、核能带杢了希望,但是有些,但是解决许多仍然存在的问题,
将有必要把材料包拪
在里,从燃料到保护结构以便方便处置这些放射性废料。
十、相当数量的能源用在交通上。减少交通工具(汽车,飞机,
火车等)的重量,和提高
引擎操作温度,将提高燃料的使用效率。新的高强度,低密度结
构材料仍在发展,用作引擎
部位能耐高温材料也在发展中。
十一、除此乊外,寻找新的、经济的能源资源,幵且更加有效的
使用目前现存的资源,是
公认为必须的。材料将毫无疑问的在这些发展过程中扮演重要的
角色。
十二、比如,太阳能直接转化为电能已经被证实了。太阳能电池
使用相当复杂幵且昂贵的
材料。为了保证技术的可行,在这个转化过程中的高效但不贵的
材料必须被发展
十三、氢燃料电池是一种非常可行幵且吸引人的能量转换技术幵
且其优点在于没有污染物
的排放,对于电子设备以及汽车动力的实习才刚刚起步,新的材
料仍然需要被发展幵用于燃
料电池上以及才生产氢气的时候充当催化剂。
十四、除此乊外,环境质量取决于我们控制大气和水污染的能力。
污染控制技术使用了各
种材料。再者,材料加工和精制的方法需要改善以便它们产生很
少的环境退化,也就是说,
在生材料加工过程中,带杢更少的污染和更少的对自然环境的破
坏,而且,在一些材料生产
过程中,有毒物质产生了,幵且它们的处置对生态产生的影响必
须加以考虑。
十五、我们使用的许多材料杢源于不可再生的资源,不可再生也
就是说不能再次生成的。
这些材料包拪聚合物,最初的原生材料是油和一些金属。这些不
可再生的资源逐渐变得枯竭
下面是必须的:1)发现另外的储藏,2)开发拥有较少负环境影
响的新材料,3)增加循环的
努力幵且开发新的循环技术。结果,不仅是生产,而且环境影响
和生态因子,和材料整个生
产过程紧密相关的材料“一生”的生命周期的考虑变得越杢越重
要。
翻译短语
一、复合材料 二、先迚材料 三、半导体
四、智能材料 五、自
由电子 六、不可再生资源
七、生物材料
八、纳米工程
翻译句子
固体材料可以很容易的分为三种基本范畴,金属、陶瓷、高分子
聚合物,这一分类是基于化
学的基本组成和原子的结构
金属由一种或多种金属构成【比如铁、铝、铜、钛、金和镍,以
及少数的非金属成分(比如
碳、氢、氧)
聚合物包拪了我们所手指的塑料和橡胶,它们中的绝大部分是由
碳氢和其他非金属成分等构
成(氧氮硅)
复合材料是由两种以上的金属、陶瓷、聚合物所构成
核能带杢了希望,但是很多需要解决的问题需要将材料考虑迚去,
比如燃料、包覆结构以及
处理辐射污染
和材料整个生产过程紧密相关的材料“一生”的生命周期的考虑
变得越杢越重要。
先迚材料 advanced material 合金 metal alloys
陶瓷材料 ceramic material 移植 implant to
粘土矿物 clay minerals 玻璃纤维
glass fiber
高性能材料 high performance
material 氢燃料电池 hydrogen
fuel cell
1、金属元素有许多游离电子,金属材料的许多性质可直接归功于
这些电子。Metallic
materials
have large numbers of
nonlocalized electrons,many
properties of
metals are directly attributable to
these electrons.
2、金属材料由一种或多种金属元素构成,且通常含有极少量的非
金属元素
Metallic material are posed of one or more
metallic element,
and often also nonmetalic
element
in a small amount
3、许多聚合物材料是有机化合物,幵具有大的分子结构。Many of
polymers are organic
pounds,and they have very large molecular
structures.
4、复合材料是由两种或两种以上的不同材料所构成
A posite
is posed with two or more different material
UNIT 3
一、 众所周知
所有的物质都是由原子组成的。在下面周期表
(periodic table)中我们可以知
道仅仅大约有成千上万的物种从我们呼吸的空气到我们用于建筑
高楼的材料,均是由一百多
种原子组成的。金属与陶瓷有不同表现行为,陶瓷又与聚合物有
所差异。物质的性能取决于
组成他们的原子类型以及原子的结合方式。
二、材料的结构可以根据我们所认为的各种特性的的数量级杢分
类,三种最常见的主要结
构上的分类通常按尺寸的增大列出,它们是
三、原子的结构,是指不可见的结构例如原子间的结合方式以及
原子的排布。
四、微观结构是指不能同肉眼观察到而能用显微镜观察到的结构。
五、宏观结构是指可以用肉眼直接观察到的结构。
六、原子结构主要影响物质的化学性质、物理性质、耐热性、电
性、磁性、光学性质。微
观结构和宏观结构也能影响这些性质但它们通常在力学性质和化
学反应速率方面的影响更
大。材料的性能为材料的结构提供了一定的线索。金属的具有的
强度就说明构成他的原子是
通过很强的成健能力结合在一起的.然而由于金属经常成型,这些
结合力必须允许原子运动。
为了了解材料的结构,我们必须知道原子所呈现的类型,原子是
如何排布的、如何结合的。
七、从基础化学我们知道仸何元素的原子结构都是有被电子围绕
的带正电的原子核组成。
一个元素的原子数目显示了原子核中带正电的质子(proton)数。
原子的重量则显示了在原子
核中质子和中子的数目,为了确定在一个原子里有多少中子
(neutrons),只需要把原子的
数目从原子的重量中减去。
八、
原子具有平衡的电荷。因此,通常有和质子数目相同的带负
电荷的电子围绕在原子
核周围。我们都知道电子以不同的能量存在,那些围绕在原子核
周围的电子可以方便的认为
是一个能源层。例如。镁原子序数是12 最内层有2个电子,
第
二层有8个电子,最外层
有2个电子。
九、 所有的化学键都包含电子。如果原子共用一个或多个电子时
他们会保持很紧密。当
原子没有部分填充的电子层时,它们会处于最稳定的状态。如果
电子层上只有几个为数不多
的电子,那么将趋向于失去它们,这些基本上都是金属元素,当
金属原子相结合的时候,金
属键就形成了。当原子有接近于全满的电子层,那么他将趋向于
从其他的原子中获得电子杢
填满外电子层,这些元素基本上都是非金属元素,两个非金属原
子乊间以共价键结合,金属
Unit 1Translation.
1
.“材料科学”涉及到研究材料的结构与性能的关系。相反,材
料工程是根据材料的结构与性质的关系来
涉及或操控材料的结构以
求制造出一系列可预定的性质。
2.实际上,所有固体材料的重要性质可以分为六类:机械、电学、
热学、磁学、光学、腐蚀性。
3.除了结构与性质,材料科学与工程还有其他两个重要的组成部
分,即加工与性能。
4.工程师或科学家越熟悉材料的各种性质、结构、性能之间的关
系以及材料的加工技术
,根据以上的原则,他或她就会越自信与熟练
地对材料进行更明智的选择。
5.只有在少数情况下,材料才具有最优或最理想的综合性质。因
此,有时候有必要为某
一性质而牺牲另一性能。
isciplinary dielectric
constant
Solid material(s) heat
capacity
Mechanical
propertyelectromagic radiation
Material processingelastic modulus
was not until relatively recent times that
scientists
came to understand the
relationships between the structural
elements
of materials and their properties.
8. Materials engineering is to solve the problem
during the
manufacturing and application of
materials.
9.
ical
properties relate deformation to an applied
load or force.
Unit 2
1. 金属是电和热很好的导体,在可见光下不透明;擦亮的金属表
面有金属光泽。
2.
陶瓷是典型的导热导电的绝缘体,并且比金属和聚合物具有更
高的耐热温度和耐恶劣环境性能。
3. 用于高科技领域的材料有时也被称为先进材料。
4.
压电陶瓷在电场作用下膨胀和收缩;反之,当它们膨胀和收缩
时,他们也能产生一个电场。
5.
随着能够观察单个原子或者分子的扫描探针显微镜的出现,操
控和移动原子和分子以形成新结构成为
可能,因此,我们能通过一些简单的原子水平的构建就可以设计
出新的材料。
6. advanced materials ceramic materials
high-performance materials clay
minerals
alloy implant
glass fibrecarbon nanotube
7. Metallic materials have large
numbers of nonlocalized
electrons and many
properties of metals are directly
attributable to these electrons.
8. Many of polymeric materials are organic pounds
with very
large molecular structures.
9. Semiconductors hace electrical
properties that are
intermediate between the
electrical conductors(viz. metals
and metal alloys) and insulators(viz. ceramics and
polymers).
10. Biomaterials
must not produce toxic substances and must
be
patible with body tissues.
Unit 3
1.
金属的行为(性质)不同于陶瓷的行为(性质),陶瓷的行
为(性质)不同于聚合物的行为(性质)。
2.
原子结构主要影响化学性质、物理性质、热学性质、电学性
能、磁性能、光学性能。微结构和宏观结
构虽也能影响这些性能但是他们主要影响力学性能和化学反应速
率。
3. 金属的强度表明原子是通过强的键结合在一起的。
4.
元素的原子序数表明该元素的原子核内带正电的质子数。而
原子的原子量则表明该原子核中质子数与
中子数。
5.
Microstructure macrostructure
Chemical reaction atomic weight
Balanced electrical charge positively charged
proton
6. 100 atoms form thousands
of different substances ranging
from the air
we breathe to the metal used to support
tall buildings,
7.The facts suggests that metallic atoms are held
together
bu strong bonds.
8.
Microstructure which includes features that cannot
be
seen with the naked eye,but using a
microscope.
Macrostructure
includes features that can be seen with the
naked eye.
9. The atomic
weight is the sum of proton number and neutron
number in the nucleus.
Unit 4
1.
当密度小于水的密度时,物体将漂浮在水面上,当密度大于
水的密度时,物体会沉降。相似的,当比
重小于1时,物体将漂浮在水面上,当比重大于1时,物体会沉
降。
2.
由于相互排斥而往相反的方向移动,导致磁通量密度比真空
中小,这种材料为反磁性材料。
3.
使磁通量密度提高1倍以上小于或等于10倍的材料叫顺磁性
材料,使磁通量密度提高10倍以上的材
料叫铁磁性材料。
4. 某些铁磁性材料
,特别是一些粉末状或夹层铁,钢或镍合金
的相对导磁率可高达1000000。反磁性材
料的相对导磁率小于1,但是到目前还没有哪种材料的相对导磁
率远小于1。
5.
当顺磁性或铁磁性的芯插入线圈时,其磁感应系数等于相对
磁导率乘以空芯时的磁感应系数。
6. specific gravity boiling
pointmagic induction
coefficient
of thermal conductivity glass transition
temperature
non-ferrous
metalslinear coefficient of thermal expansion
mass per unit of volume
7. Properties that describe how a substance
changes into a
pletely different substance are
called chemical
properties.
8. Phase is a physical property of matter
and matter can
exist in four phases: solid,
liquid, gas and plasma.
9. At some
temperature below the melting point, polymers
start to lose their crystalline structure but
the molecules
remain linked in
chains, which tesults in a soft and pliable
material.
10. In engineering
applications, permeability is often
expressed
in relative, rather than in absolute.
Unit 5
1.
金属的力学性能决定了材料的使用范围及期望的服役寿命。
2.
因此,一般多测几次以得到力学性能,报导的数值一般是平均
值或者计算的统计最小值。
3.材料的承载方式极大地影响了材料的力学性能,也决定了材料
失效形式,以及在失效前是否有预警。
4.然而,受力弯曲时会产生一个应力分布,应力大小与到轴线的
垂直距离有关。
5.材料受到低于临界压力即屈服强度的力时,材料才会发生弹性
形变。
6. Test specimenstatic loading forcenormal
axis
Engineering straincritical
stressyield strength stress
area
Stress- strain curve
7.
Temperatures below room temperature generally
cause an
increase in strength properties of
metallic alloys;
while ductility,
fracture toughness, and elongation usually
decrease.
8. From the
respective of what is happening within a material,
stress is the internal distribution of forces
within
a body that balance and
react to the loads applied to it.
9. Engineering strain is defined as the amount of
deformation in the direction of the applied
force divided by
the initial
length of the material.
10. A
material with high strength and high ductility
will
hace more toughness than a material with
low strength
and high ductility.
1.
随着影响我们星球上人类生存条件的社会问题的即将出现,材
料科学与工程界有责任和机遇通过解决
未来世界的需求—在能量、交通、住房、饮食、回收和健康方面
的需求来改变世界。
2. 不发达国家的人口增长率远高于1.4%的世界平均人口增长率。
3.
全球能源使用的预算在2025以前将以每年1.7%速度增长,这
比世界人口增长率快多了。
4.
此外,发达地区的人均能量使用量是不发达地区人均能量使用
量的九倍以上。
5. gross domestic productmaterials science
and
engineeringmarket economy
Societal issues economic index sanitation
Gross national product popilation growth
rate
6. Some things that
have been constant over time are human
innovation and creativity, the engineer’s
ability to
address societal needs,
and the entrepreneurial spirit of
engineering.
7. We have witnessed the re-shaping
of our lives through
revolutions that hace
taken place in medicine,
telemunications, and transportantion industries.
8. Eighteen percent of the world’s
population lacks aess
to safe drinking water
and nearly 40% has no aess to
sanitation.
9. Materials and
society are interlinked, and it is only
rational that we should see a close relation
between the MSE
research agenda
and societal issues that affect the human
condition on the globe.
Unit 7
1.
从化学角度来说,金属是一类容易失电子以形成正离子的元素,
它与其他金属原子形成金属键。
2. 金属键的无方向性被认为是金属具有延展性的主要原因。
3. 存在着共价键的晶体只有在原子之间的键断裂的情况下变形,
从而导致晶体破裂。
4.
合金特别是为满足更高应用要求的合金比如喷气发动机,可能
含有十种以上的元素。
5. delocalized electronelectronic structure
alkaline earth metal chemical cell
nuclear charge electric
conductivity
6. Metals are
sometimes described as a lattice of positive
ions surrounded by a cloud of delocalized
electrons.
7. Metals in
general have superior electric and thermal
conductivity, high luster and density, and the
ability to be
deformed under
stress without cleaving.
8. An
alloy is a mixture of two or more elements in
solid
solution in which the major ponent is a
metal.
9. Combining different
ration of metals as alloys modifies
the
properties of pure metals to produce desirable
characteristics.
Unit 8
1.
超耐热合金的发展非常依赖于化学与加工的创新,并主要受到
航空和能源工业的推动。
2. 抗蠕变性能主要取决于晶体结构内位错速度的放缓。
3. 超耐热合金在加工方面的发展使超耐热合金的操作温度大幅
度提高。
4. 单晶高温合金是运用改进的定向凝固技术而形成单晶的,因此
在材料中并无晶界。
5. faced-centred cubic crystal
structureturbine entry
temperature
metallic materialsphase stability
nuclear reactor synthesis of nanoparticle
6. Superalloys typically hace an
sustenitic faced-centered
cubic crystal
structure.
7. Superalloys are used
where there is a need for high
temperature
strength and corrosionoxidation resistance.
8. Superalloys are widely used in aircraft
,submarines,
nuclear reactors and military
electric motors.
9. At high
temperatures the gaseous aluminum chloride(or
fluoride) is transfereed to the surface of
part and
diffuseds inside.
1.
腐蚀过程从本质上说是一个电化学的过程,有着与电池相同的
本质特征。
2. 从矿物中提炼金属所需能源的问题与后续的腐蚀和能量释放
直接相关。
3.
当电子与中和的正离子(如电解液中的氢离子)发生反应时,
阴极处电子得以平衡。
4.Protective film circuit
Free electronelectron transfer
Metal cation anode reaction
5.
Some metals, such as gold and silver, can be found
in the
earth in their natural, metallic state,
and they have
little tendency to
corrode.
6. Oxidation is
the process of stripping electrons from an
atom and reduction ours when an electron is
added
to an atom.
7. If the surface bees wet, corrosion may take
place through
ionic exchange in the surface
water layer
between the anode and
cathode.
8. Corrosion is monly
classification based on the appearance
of the
corroded material.
Unit 10
1. 我们要观察(研究)这些性能,看它们与我们所期望的陶瓷的
组成有多匹配。
2. 在高于玻璃化转变温度的高温下,玻璃不再具有脆
__,而表
现为粘稠液体。
3.它们显示出优异的力学性能、抗腐蚀氧化性能,或电学、光学
抑或是磁学性能。
4.一般认为,先进是最近100年才发展起来的,而传统的基于粘
土的陶瓷早已在25
000多年前就被使用
了。
5.
the glass transition temperature ionic-covalent
bond
Stress
distributioncoefficient of thermal expansion
Glass optical fibrematerials science and
engineering
Solid-oxide fuel cells
electron microscopy
6. Diamond,
which is classified as a ceramic, has the highest
thermal conductivity of any known material.
7. Ceramic are stronger in pression
than in tension, whereas
metals have parable
tensile and pressive
strength.
8. Ceramics generally
have low toughness, although bining
them in
posites can dramatically improve
this property.
9. The functions of
ceramic products are dependent on their
chemical position and microstructure, which
determines their properties.
Unit 11
1.
材料科学与工程领域经常是根据四大方面—合成与加工,结构
与组成,性质与性能之间的相互联系来
定义的。
2.
我们不仅要考虑具有完美晶格和理想结构(的情况),我们
也要考虑材料中不可避免的结构缺陷的存
在,甚至是无定形的。
3.通过热压可使孔径减小从而得到高密度产品。
4.在运输时,厂方要提供关于产品危害方面的信息。
lline
ceramicsgrain boundary
Alkaline
earth oxide oxide additive
Triple
pointsaturation magization
Television tubethe color scale
6.
7. To understand the behavior and
properties of any material,
it is essential to
understand its structure. The grain size is
determined by the size of the initial powder
particles and the
way in which they were
consolidated.
8.
9. Transparent or translucent
ceramics require that we limit
the scattering
of light by pores and second-phase particles.
Alumina ceramics are used as electrical
insulators because of
theie high electrical
resistivity and low
dielectric
constant.
Unit 12
1.材料的选择是任何组分设计至关重要的环节,尤其在植入体和
其它医疗器械方面是特别重要的。
2.我们能进行承载应用的三种主要材料是金属、聚合物和陶瓷。
3.高密度、高纯度的氧化铝被大量的用于植入物,特别是在需要
承载压力的髋关节修复和牙移植中。
4.在陶瓷或陶瓷复合材料中,氧化锆的磨损率远远高于氧化锆铝
的磨损率。
5. controlled reactionstress
shielding
Total hip
prosthesestrain-to-failure ratio
Mechanical stress flexural strength
Martensitic transformation
6.
Biomaterial is a non-viable material used in a
medical
device intended to interact with
biological systems.
7. These
repairs bee necessary when the existing part bees
diseased, damaged, or just simply wears out.
8. Because of its low density,
cancellous bone has a lower
E and higher
strain-to-failure ratio than cortical bone.
9. Eliminating stress shielding, by
reducing E, is one of
the primary motivations
for the development of
bioceramic
posites.
10. There are
questions concerning the long-term effect of
Unit 13
1.
聚合物的俗名叫塑料,这个词指的是一大类具有许多性质和用
途的天然材料和合成材料。
2. 聚合物合成是一个把叫做单体的小分子通过共价键的结合形
成链的过程。
3.
支化聚合物分子是由一条带有一个或多个侧基或支链的主链
组成。一些特
殊的支化聚合物有星型聚合物、梳状聚合物和刷状聚合物。
4.
某些生物聚合物是由一系列不同的胆识结构却相关的单体组
成的,例如聚核苷酸是由核苷组成的。
5. persistence length cross-link
Polar monomer nucleic acid
Polymerization
polyelectrolyte
6.
7.
8.
9.
Unit 14
1. 大量合成的聚合物具有碳-
碳骨架,这是因为碳原子具有与其
它原子形成更强更稳定的键的优异性能。
2.它们在一定范围内软化,这与完好晶体相具有非常明确的熔点
不同。
3.分子量取决于其合成时的条件,因此分子量可能分布很宽或分
布很窄。
4. Goodyear
很偶然的发现了在橡胶中加入硫磺并加热这个混合
物能使橡胶变硬,对氧化和化学进攻能
力的敏感性降低。
5. thermosetting
plastiross-sectional area
Polymerization reaction double bond Most mercially
important polymers today are entirely
synthetic and produced
in high volume, on
appropriately scaled organic synthetic
techniques. Some biological polymers are posed
of a variety of
different but structurally
related monomers, such as
polynucleotides
posed of nucleotide sbunits. A polymer
molecule with a high degree of crosslinking is
referred to as
a polymer work. In polymers,
however, the molecular mass may
be expressed
in terms of degree of polymerization, essentially
the number of monomer Units which prise the
polymer. ? radiation
emission from zirconia
ceramics.
材料科学与工程专业英语1-18单元课后翻译答案
Unit 1Translation.1.“材料科学”涉及
到研究材料的结构与性
能的关系。相反,材料工程是根据材料的结构与性质的关系来涉及或
操控
材料的结构以求制造出一系列可预定的性质。
2.实际上,所有固体材料的
重要性质可以分为六类:机械、电学、
热学、磁学、光学、腐蚀性。3.除了结构与性质,材料科学与工
程还
有其他两个重要的组成部分,即加工与性能。4.工程师或科学家越熟
悉材料的各种性质、
结构、性能之间的关系以及材料的加工技术, 根
据以上的原则, 他或她就会越自信与熟练地对材料进
行更明智的选
择。5.只有在少数情况下,材料才具有最优或最理想的综合性质。因
此,有时候
有必要为某一性质而牺牲另一性能。isciplinary
dielectric
constant Solid materials heat capacity Mechanical
property electromagic radiation Material
processing elastic
was not until relatively
recent times that
scientists came to
understand therelationships between the
structural elements of materials and their
properties.8.
Materials
engineering is to solve the problem during the
manufacturing
andapplication of ical
properties relate
deformation to an applied
load or 21. 金属是电和
热很好的导体,
在可见光下不透明;擦亮的金属表面有金属光泽。
2.
陶瓷是典型的导热导电的绝缘体,并且比金属和聚合物具有更高
的耐热温度 和耐恶劣环境性能。3.
用于高科
技领域的材料有时也被称为先进材料。4.
压电陶瓷在电场作用下
膨胀和收缩;反之,当它们膨胀和收缩时,他们也能
产生一个电场。
5.
随着能够观察单个原子或者分子的扫描探针显微镜的出现,操控
和移动原子
和分子以形成新结构成为可能,因此,我们能通过一些
简单的原子水平的构
建就可以设计出新的材料。6. advanced
materials ceramic
materials high-performance materials clay
minerals alloy implant glass fibre carbon
nanotube7. Metallic
materials have large
numbers of nonlocalized electrons and many
properties of metals are directly attributable
to these
electrons.8. Many of polymeric
materials are organic pounds
with very large
molecular
structures.9.
Semiconductors hace electrical properties
that
are intermediate between the electrical
conductorsviz.
metals and metal alloys and
insulatorsviz. ceramics and
polymers.10.
Biomaterials must not produce toxic
substances and must be
patible with body 31.金属的行为(性质)不同
于陶瓷的行为(性质)
,陶瓷的行为(性质)不同于 聚合物的行为
(性质)
。2.原子结构主要影响化学性质、物理性质、热学性质、
电学性能、磁性能、光
学性能。微结构和宏观结构虽也能影响这些
性能但是他们主要影响力学性能 和化学反应速率。3.金属
的强度表
明原子是通过强的键结合在一起的。4.元素的原子序数表明该元素
的原子核
内带正电的质子数。而原子的原子量则
表明该原子核中质子数与
中子数。5.Microstructure macrostructure
Chemical reaction
atomic weight Balanced
electrical charge positively charged
proton6.
100 atoms form thousands of different
substances ranging from the air we breathe
to the metal used
to support tall
buildings7.The facts suggests that metallic
atoms are held together bu strong bonds.8.
Microstructure which
includes
features that cannot be seen with the naked eyebut
using a microscope. Macrostructure
includes features that
can be seen with the
naked eye.9. The atomic weight is the sum
of
proton number and neutron
number in the
41.当
密度小于水的密度时,物体将漂浮在水面上,当密度大于水的密度时,
物
体会沉降。相似的,当比重小于 1 时,物体将漂浮在水面上,当
比重大于 1
时,物体会沉降。2.由于相互排斥而往相反的方向移动,
导致磁通量密度比真空中小,这种材料
为反磁性材料。3.使磁通量
密度提高 1 倍以上小于或等于 10 倍的材料叫顺磁性材料,
使磁通
量 密度提高 10 倍以上的材料叫铁磁性材料。4.某些铁磁性材料,
特别是一些粉
末状或夹层铁,钢或镍合金的相对导磁率可 高达
1000000。 反磁性材料的相对导磁率小于
1,但是到目前还没有哪种
材料 的相对导磁率远小于
1。5.当顺磁性或铁磁性的芯插入线圈时,
其磁感应系数等于相对磁导率乘
以空芯 时的磁感应系数。6.specific gravity boiling
point
magic induction coefficient of thermal
conductivity glass
transition temperature non-
ferrous metals linear coefficient
of thermal
expansion mass per unit of volume7. Properties
that
describe how a substance changes into a
pletely different
substance are called
chemical properties.8. Phase is a physical
property of matter and matter can exist in
four phases: solid
liquid
gas and plasma.9. At some temperature below the
melting point polymers start to lose their
crystalline
structure but the molecules remain
linked in chains which
tesults in a soft and
pliable material.10. In engineering
applications permeability is often expressed
in relative
rather than in 5 1. 金
属的力学性能决定了材料的使用范围及期望的服役寿命。 2.
因
此,一般多测几次以得到力学性能,报导的数值一般是平均值或者计
算的 统计最小值。
3.材料的承载方式极大地影响了材料的力学性
能,也决定了材料失效形式,以及在失效前是否有预警。
4.然而,
受力弯曲时会产生一个应力分布, 应力大小与到轴线的垂直距离有
关。
5.材料受到低于临界压力即屈服强度的力时,材料才会发生弹
性形变。
6. Test specimen static loading force normal axis
Engineering strain critical stress yield
strength stress area
Stress- strain curve
7. Temperatures below room
temperature generally cause an
increase in strength properties of
metallic alloys while
ductility fracture
toughness and elongation usually decrease.
8.
From the respective of what is happening within a
material
stress is the internal distribution
of forces within a body that
balance and
react to the loads applied to it. 9.
Engineering strain is
defined as the amount of
deformation in the direction of the
applied
force divided by the initial length of the
material.
10. A material with high strength
and high ductility will hace
more toughness
than a material with low strength and high
61. 随着影响我们星球上人类生存条件的社会问题
的即将出现,材料科学与工程
界有责任和机遇通过解决未来世界的
需求—在能量、交通、住房、饮食、回
收和健康方面的需求来改变
世界。2. 不发达国家的人口增长率远高于
1.4的世界平均人口增长
率。3. 全球能源使用的预算在 2025 以前将以每年
1.7速度增长,
这比世界人口增 长率快多了。4.
此外,发达地区的人均能量使用量
是不发达地区人均能量使用量的九倍以上。5. gross
domestic
product materials science and
engineering market economy Societal issues
economic index
sanitation
Gross national product popilation growth rate6.
Some things that have been constant over time
are human
innovation and creativity the
engineer’s ability to address
societal needs
and the entrepreneurial spirit of engineering.7.
We have
内容仅供参考
风度翩翩什么意思-parallax
water什么意思-catch
daredevil-钢琴的英语
相映成趣的意思是什么-维尼熊
鹦鹉的英文-藉怎么读
soup怎么读-辅导托福
aide-伊莉莎白女王
古诗欣赏-bottle怎么读
-
上一篇:各种咖啡的中英文对照翻译大全
下一篇:快速制造模具技术中英文对照外文翻译文献